Most blogs and articles online will tell you that YES, you can certainly change out your own faucet by yourself without hiring a plumber, depending on your comfort level and skill. This is a great way to save some money and accomplish a necessary repair in your own home without needing a degree or a license. However, we would like to supply you with a pre-start checklist of things you need to know and problems you may encounter before you begin to dismantle your taps.
If you are tackling residential plumbing in Calgary, understanding the process and having the right tools will be essential to a successful installation.Tools and Supplies You Will Need
Firstly, do you have the right tools to complete the job? You will need a wrench to loosen and tighten the water supply lines. Plumber’s tape is needed to wrap the threads when you hook back up the supply lines. You may need a basin wrench to unscrew the nuts underneath your sink at the base of the faucet if it’s in a tight and hard-to-reach location. Once the old taps are removed, you will need a tool such as a putty knife or scraper to clean away old debris or deposits built up around the base of the holes.Additional Supplies for a Smooth Installation
Some supplies may not be altogether necessary but will surely come in handy. A small bucket to catch any excess water when disconnecting the water lines. A cleaning rag to wipe away moisture or sludge left over once the old taps are removed. And silicone caulking to align the base plate of the new faucet to prevent leaking. Another pair of hands may also come in handy if you need to get under the sink to loosen the nuts with a basin wrench. If they are tight or stuck from rust or sediment build-up, then someone to hold the faucet while you loosen them would be helpful. Another good tip is to snap a pic or two with your phone of the plumbing configuration before you begin to dismantle. This will give you a reference for later when you reassemble.Are Additional Parts Required?
Some extra parts could be required, as not all new fixtures come with everything needed to accommodate every sink. You may need new water supply lines if your existing ones are older or worn. You don’t want to risk a leak by reusing old water lines. For stronger and longer-lasting lines, it is recommended to use braided stainless steel. If the number of holes in the sink is more than is required for the new faucet, you may need a new base plate to extend over top of these as the new faucet plate may not be large enough to accommodate this. Similarly, if you are adding new holes for a sprayer, soap dispenser, or even moving to double taps from a single tap, you will require more tools and parts that are not supplied with the new faucet.Key Considerations Before Installing a Faucet
After all this, the most important thing you will need is knowledge. Do you know where the water shut-off valves are located? Is there one for each hot and cold water supply line under the sink, or do you need to turn off the water main for the whole house? Can you tighten the nuts during reassembly so they are tight enough not to leak but not so tight they cause a fracture in the fitting?When Should You Call a Plumber?
In summary, if you are asking yourself, “do I need a plumber to install a faucet?” the answer is no, you do not necessarily need a plumber. However, if you want to ensure a hassle-free installation, hiring a professional is always an option. If you are in need of expert plumbing services, including plumbing and heating in Calgary, it may be worth reaching out to a local specialist. Whether it’s for faucet installation or more complex plumbing needs, professional services can provide peace of mind and long-term reliability. Sometimes, it may just be easier to call a plumber and know that you have the peace of mind of having an experienced professional handle the installation.Yes, you can install a faucet by yourself if you have basic DIY skills and the right tools. However, if you’re unsure about plumbing or want a hassle-free installation, hiring a plumber is always an option.
You will need:
- A wrench to loosen and tighten water supply lines
- Plumber’s tape for sealing threads
- A basin wrench for tight spaces under the sink
- A putty knife or scraper to remove old debris
Yes, some helpful supplies include:
- A small bucket to catch excess water
- A cleaning rag to wipe moisture and sludge
- Silicone caulking to prevent leaks
- An extra set of hands for difficult installations
Possibly. Some new faucets don’t include water supply lines, so you may need to purchase braided stainless steel lines for durability. Additionally, if your sink has extra holes, you may need a base plate to cover them.
Check if your sink has shut-off valves for hot and cold water under the sink. If not, you will need to turn off the main water supply before starting the installation.
- Nuts and bolts might be rusted or stuck due to sediment buildup
- Water lines may be old and prone to leaks
- Misalignment of the new faucet with existing holes in the sink
- Over-tightening the fittings, which can cause fractures
Yes, but you may need additional tools and parts to drill new holes in the sink or countertop.
Yes! Taking photos of your existing plumbing setup can be very helpful when reassembling everything correctly.
You should consider calling a plumber if:
- You are unsure about shutting off or reconnecting the water supply
- The installation requires modifying plumbing lines
- You experience leaks after installation and cannot fix them
If you need assistance, Harpersplumbing company can help with faucet installations and other plumbing needs, ensuring a smooth and leak-free setup.
